Discontinued - Sound Devices

The following models have been discontinued. Recommended replacements are listed, if available. Contact Sound Devices Support Staff if a discontinued model requires servicing.

Model Description Manual Firmware
702 The 702 was a portable, two-track, file-based digital audio recorder. 702 PDF Manual 702 Firmware v2.67
722 The 722 was a two-track file-based digital audio recorder with internal hard drive. 722 Manual 722 Firmware v2.67
744T The 744T was an ultra-portable, four-track file-based digital audio recorder. 744T Manual 744T Firmware v2.67
788T The portable 788T, with its eight inputs, 12-track recorder, and MixAssist, provided expansive mixing capabilities, superior audio quality, and extensive customization. The 788T recorded to an internal SATA harddrive, but also offered other storage options, such as CompactFlash cards with UDMA support, or an external FireWire harddrive or DVD-RAM. 788T Manual 788T Firmware v3.02
442 / 442N The four-channel 442 Field Production Mixer set the standard for field mixers for functionality, size, and performance with its introduction in 2001. Its design was driven by the requirements of professionals in film, TV news, documentary, radio, effects recording, and music production. 442 / 442N Manual -
CL-1 Keyboard interface and remote roll accessory for all 7-Series recorders. Connects via C. Link connector. Includes XL-RJ cable. CL-1 Manual -
CL-2 A 30mm linear fader for remote level control of any 788T-SSD (or 788T) input. CL-2 Manual -
CL-WIFI The CL-WiFi accessory adds remote iPhone, iPad, and iPod Touch functionality to 788T and 788T-SSD Recorders. When the CL-WIFI hardware is used with the downloadable application, 788T users can remotely view, control, and edit audio and file-related information from their Apple device.

NOTE: The CL-WiFi hardware and application support was discontinued in October 2015. No further development will be given to the CL-WiFi or the iOS application. Our CL-WiFi application continues to run on iOS 10 and earlier versions of iOS. It is not supported by iOS 11. If the use of the CL-WIFI is important to your recording setup we advise not updating to IOS 11 or keep a separate dedicated iOS device running iOS 10 or earlier.
CL-WIFI Manual -
CS-1 Basic field case designed for Sound Devices MixPre, MP-2, HX-3, and USBPre by Porta-Brace. Has one internal accessory compartment and an external accessory pocket. Includes premium strap. CS-1 Manual -
CS-2 Field case designed for Sound Devices MixPre, MP-2, and HX-3 Made by Porta-Brace. Includes an internal compartment for an NP-type battery. Has one internal accessory compartment and an external accessory pocket. Includes premium strap. CS-2 Manual -
CS-7 Carry case designed exclusively for Sound Devices 7-Series Field Recorders. Accepts RM-series accessories on the top-side and can be mounted to the CS-302 and CS-442. CS-7 Manual -
CS-302 Carry case designed exclusively for Sound Devices 302 Field Mixer. Includes a dedicated pouch for an NP-type battery and leather shoulder strap. Accepts RM-series accessories and AH-2 harness (not included). CS-302 Manual -
CS-4 Carry case designed for the 442 mixer; with included accessory case for wireless. CS-4 Manual -
CS-4W Carry case designed for the 442 mixer; with included accessory case for wireless. CS-4w Manual -
CS-442 Carry case designed for 442 Field Mixer. Includes a dedicated pouch for an NP-type battery and leather shoulder strap. Accepts RM-series accessories and AH-2 harness (not included). CS-442 Manual -
CS-664 Carry case designed for 664 (or 688) Field Production Mixer. Includes a dedicated pouch for an NP-type battery and leather shoulder strap. CS-664 Manual -
CS-W Removable accessory case for the CS-5 Production Case, designed to hold wireless transmitters and receivers and provides the appropriate cable routing for interconnection of wireless, mixers, and recorders. Built for Sound Devices by CamRade. CS-W Manual -
664-Kit The 664 KIT is a complete production mixer recorder kit, containing all the necessary equipment, such as the CS-664 carry case, to operate the 664 in a professional audio production environment. 664-Kit Manual -
MixPre Two-channel microphone mixer with phantom power, metering, headphone monitoring. Powered from two AA batteries or external DC. MixPre Manual -
MixPre-D A compact, class compliant USB portable audio hardware interface. MixPre-D Manual -
MP-2 Two-channel microphone preamplifier with 48-volt phantom power, high-performance metering, headphone monitoring, and M/S stereo matrix. Powered from two AA or external DC. MP-2 Manual -
MD-4 Analog-to-Dante Interface with Headphone Monitor for connecting analog audio to Dante™ audio networks. MD-4 Manual MD-4 Firmware v
PIX 240 HD-SDI and HDMI Production Video Recorder (branded Sound Devices) PIX 240 Manual PIX 240 Firmware v
PIX 220i HDMI Production Video Recorder (branded Sound Devices) PIX 220i Manual -
PIX 220 HDMI Production Video Recorder (branded Sound Devices) PIX 220 Manual -
PIX-CADDY 2.5" SSD caddy for PIX HD Video Recorders. Firewire 800, USB 3.0 and eSATAp connections for data transfer. PIX-CADDY Manual -
PIX-SSD2 2.5" SSD approved for use with PIX-220 and PIX-240 Portable Video Recorders. 240 GB capacity. Pre-formatted UDF. - -
PIX-SSD3 2.5" SSD approved for use with PIX-220 and PIX-240 Portable Video Recorders. 240 GB capacity. Pre-formatted UDF. PIX-SSD3 Manual -
PIX-SSD4 2.5" SSD approved for use with PIX-220(i) and PIX-240(i) Portable Video Recorders. 240 GB capacity. Pre-formatted UDF. PIX-SSD4 Manual -
PIX-SSD5 2.5" SSD approved for use with PIX-220(i) and PIX-240(i) Portable Video Recorders. 240 GB capacity. Pre-formatted UDF. PIX-SSD5 Manual -
PIX-SHIM 2.5" SSD approved for use with PIX-220(i) and PIX-240(i) Portable Video Recorders. 240 GB capacity. Pre-formatted UDF. PIX-SHIM Manual -
USBPre Two-channel computer audio interface. Connects to Mac OS and Windows computers. USB for both connection and power. USBPre Manual -
XL-15 XLR-M to XLR-F cable with built-in 15 dB pad. For use with balanced connections only. - -
XL-40 50-cm (20-inch) XLR-F to XLR-M cable with integrated 40 dB attenuation switch. Uses Neutrik FXS Type switch at the XLR-M connector. Used to input line level sources into MP-1, MP-2, and MixPre. Also useful to output microphone level signals from an MP-2 or MixPre. - -
XL-55 XLR-F to XLR-M cable with built-in 55 dB attenuation and unbalanced output for early MixPre and MP-2 to Sony PD-XXX camera connection. - -
XL-7 TA3-F to 3.5-mm jack for use with 302; 12-inch; to connect unbalanced, stereo TA3 tape out connection to unbalanced stereo 3.5-mm inputs. - -
XL-B1 Spare battery pack for 7-Series portable recorders. Compatible with Sony L-Series camcorder mount. 7.2 V, 1500 mAh - -
XL-CHARGE Two-battery charger for Sony L-compatible Li-ion batteries. 100/240 VDC input and 1.7 A output. - -
XL-ESata A 36-inch eSATAp cable. - -
XL-DVDRAM External bus-powered FireWire DVD-RAM drive for use with all 7-Series recorders. - -
XL-K1 Knob accessory kit for early 442 mixers. Kit includes the four visual and tactile position-indicating fader knobs. Includes four, 2-black 2-gray. Includes colored inserts. 442-specific. - -
XL-K2 Blue knob accessory kit for 442 mixer. - -
XL-K3 Replacement fader knobs for the CL-9. - -
XL-K7 Trim-knob kit for 702, 702T, 722 and 744T. - -
XL-K664 Trim-knob kit for 664/552. - -
XL-K788 Trim-knob for 788T. - -
XL-LB LEMO®-5 to BNC cable for time code jamming of audio and video equipment with BNC connectors for SMTPE time code; 31-inch. - -
XL-NP NP-type battery cup with 12-inch cable terminated in Switchcraft locking DC jack at equipment end. For use with HX-3, MM-1, MP-2, MixPre (sn <0506), and 442 (sn <0303). - -
XL-TA25 TA5 to 3.5 mm male, 12-inch link cable, used with MixPre-D, 552, and 664. - -
XL-TA35 TA5 to TA3, 12-inch link cable, used with 302, 442, 552, and 664. - -
XL-TA55 TA5 to TA5, 12-inch link cable, used with 552 and 664. - -
XL-TP In-line barrel adapter converts phantom power (12-volts to 15-volts) to 12-volt T-power. Designed to work with Sound Devices MP-1, MP-2, and MixPre. - -
XL-WP Universal AC-to-DC power supply for Sound Devices MM-1 and HX-3. 100–240, 50/60 Hz; output 12 VDC, 24 watts on coaxial power connector. - -
XL-WP2 Universal AC-to-DC power supply for Sound Devices MM-1 and HX-3. 100–240, 50/60 Hz; output 12 VDC, 24 watts on coaxial power connector. - -
XL-WP3 Universal, 45 W in-line AC-to-DC power supply coaxial DC plug, with detachable IEC power cord for Sound Devices MM-1 and HX-3. 100–240, 50/60 Hz. - -
XL-WPH Universal AC-to-DC power supply for Sound Devices mixers and audio recorders. Input: 100–240, 50/60 Hz; output 12 VDC, 24 watts on Hirose 4-pin connector. - -
XL-WPH2 Universal AC-to-DC power supply for Sound Devices mixers and audio recorders. Input: 100–240, 50/60 Hz; output 12 VDC, 24 watts on Hirose 4-pin connector. - -