Frequency Response
  • 20 Hz - 30 kHz, +0.2, -0.5 dB (relative to 1 kHz level with 150 ohm source, gain controls set at 50%)
Equivalent Input Noise
  • -126 dBu (-128 dBV) maximum mic in to line out, (150 ohm source, flat weighting, 22 Hz - 22 kHz bandwidth, gain control set at 50% or higher, phantom power off)
Input Clipping
  • -10 dBu minimum (mic level), +28 dBu minimum (line level)
Output Clipping Level
  • Line: +22 dBu minimum with 100k ohm load
  • Mic: -18 dBu minimum with 100k ohm load
Gain
  • Mic to Line, max: 66 dB
  • Line to Line, max: 26 dB
  • Line to Mic, max: -14 dB
  • Mic to Mic, max: 26 dB
  • Mic (TA3) relative to Line out: -36 dB
Dynamic Range
  • 110 dB minimum, mic input to line output
THD + Noise
  • 0.05% maximum (from 50 Hz to 22 kHz @ +4 dBu output level)
Common Mode Rejection Ratio
  • 100 dB minimum at 80 Hz, 60 dB minimum at 10 kHz
Inputs
  • Transformer-balanced, 2k mic input impedance, 16k line input impedance
Outputs
  • XLR-Line/Mic: active-balanced, 100 ohm output impedance
  • XLR-AES3: balanced, 110 ohm, two-channel, on right XLR connector
  • TA3: unbalanced mic-level output, pin-2 left, pin-3 right, pin-1 ground, 200 ohm output impedance
  • Tape (3.5 mm) Unbalanced, tip-left, ring-right, sleeve-ground, 2.1k ohm output impedance
A/D Converter for USB
  • 103 dB typical, A-weighted; sample rate selectable 44.1k, 48k, or 96k
Output Noise
  • -100 dBu (-102 dBV) maximum (22 Hz - 22 kHz bandwidth, flat filter)
High Pass Filters
  • 80 Hz or 160 Hz (switch selectable), 6 dB per octave
Phantom Power
  • 12-volt through 680 ohm resistors or 48-volt through 6.8k resistors (switch selectable)
Limiter
  • Threshold adjustable, +8 dBu to +18 dBu, 20:1 limiting ratio, 1 mS attack time, 200 mS release time.
Metering
  • 16 segment x 2 GaN (Gallium Nitride) meters, peak + VU responding, wicked bright
Power
  • Internal: 2 AA alkaline batteries, 4 hours life typical, no phantom power
  • External: 10-17 VDC via 4-pin Hirose, pin 4 = +, pin 1 = -, completely isolated floating supply
USB Connectivity
  • USB class-compliant device, analog input to USB output, USB monitoring in headphones
Temperature
  • Operating: -20°C to 60°C, 0 to 95% relative humidity; (non-condensing), storage: -40°C to 85°C
Weight
  • 0.7 kg, 1.5 lbs with batteries
Dimensions
  • 43 mm x 94 mm x 140 mm (h x w x d), (1.7" x 3.7" x 5.5")

Ready To Buy?

Find a Reseller