6G-SDI Signal from Blackmagic URSA Camera with PIX-E7 / PIX-E5

All of these criteria must be met to properly send 6G-SDI signal from the Blackmagic URSA camera to a PIX-E7 or PIX-E5 recording monitor:

• Use a high quality SDI cable.
• Connect SDI cable to the rear SDI output of the camera. The side output will only send HD signal.
• Set the camera to record 3840 x 2160.
• Set the the SDI mode of the camera to 4K.

The quality of the SDI cable is paramount. Many available cables do not meet the demanding requirements of the high bandwidth of 6 Gb/s signal.