8-Series v4.00

Download

New

  • CL-16 Linear Fader Controller support on 888 and Scorpio. 
  • Output naming allows you to assign custom names in the LR, X1-X10 Outputs menu. Custom names appear on output meters wherever shown for easy identification.
  • Controllers menu option Require Shift for Mute: set to On to prevent accidental activation of mute from supported controllers. When on, button shortcut for mute is Shift + Mute on 3rd party controllers. Mute is always Menu + Mute on the CL-16. 
  • Bus Soloing: solo a bus to isolate the signal in the headphone monitor. A bus is solo’d in the headphone monitor while in the Bus screen by default. Headphone monitor source returns to previous selection when the Bus screen is exited. Turn solo on or off while within the Bus screen by toggling the option using the tone switch.
    Linked busses will be solo’d with the odd bus in the left ear and the even bus in the right. 
  • Channel Bus Sends now available in Bus screens. Use the Sel knob to navigate through the Bus send routing. When an ISO set to Send (highlighted in light blue) is selected, activate the * toggle then rotate the HP knob to adjust the gain of the ISO sent to the bus. 
  • New Custom SD Card names. During the format process of SD1 and SD2, you now have the ability to enter a custom name. 

Changes

  • When editing scene names, the keyboard cursor is automatically placed at the end of the scene name to save editing time.
  • Pressing Stop on a controller while in Stop mode now latches on Next Take editing allowing for easy access to Next Take’s Scene, Take, and Notes editing.
  • Changes to Scene Name Shortcuts 
    • In Record:
      • Current Scene Name: Edits the Current Take Scene Name being recorded and Next Take Scene Name.
      • New Scene Name: Creates a new Next Take Scene Name and the Current Take Scene Name being recorded.  It also adds the new scene name to the scene name entry list. 
    • In Stop:
      • Current Scene Name: Edits the Current Take Scene Name being recorded and Next Take Scene Name.
      • New Scene Name: Creates a new Next Take Scene Name and also adds it to the scene name entry list. It does not affect Current Take Scene Name.

Fixed

  • Renaming AAC files no longer results in missing takes when the storage volume is remounted. 
  • Channels are no longer limited to Off or Pre-Fade when routing channels to the LR Bus from the CL-12.
  • Rare occurrences where takes do not appear in the Take List, cannot be copied to another volume, or be used to create sound reports no longer occur.