302 Input and Output Panel Descriptions
The chart below describes the inputs and output panels of the Sound Devices 302 Compact Field Mixer, including functionality and pin configurations. (more…)
Tag: 302
Products Mentioned
The “Five Channel” 302 Mixer
The 302 has three full-featured inputs, selectable between mic and line level. When additional inputs are needed, such as for additional wireless receivers or for stereo playback, the 3.5 mm Return connector can be reassigned as an input connector for channels 4 and 5. This feature is selected in the Setup Menu. (more…)
Products Mentioned
302/442 Tone Oscillator Left Channel Identifier Behavior
The 302 and 442 mixer's tone oscillators have several modes of operation. From the Setup Menu, the tone frequency and level can be set. (more…)
Products Mentioned
MS Stereo with 442 & 302 Mixers
Both the 442 and 302 field mixers can decode MS stereo microphone signals. Depending on your workflow you can decide to decode the MS stereo signal in one of two ways: (more…)
Products Mentioned
302/442 and “Crackling” Input Controls on Power Up
The 302, like all Sound Devices mixers, including the 442 and MixPre, can exhibit a static, or crackling sound when gain controls are manipulated when the unit is first powered. This noise goes away as the power supply and filter capacitors become fully charged.
(more…)Products Mentioned
Adding a Mono Mic or Tape Level Output to the 302
The addition of a mono mic-level output to the 302 is a useful addition for feeding transcription recorders, "Comtek" transmitters, and other inputs. The diagram below illustrates the proper wiring to add a mono mic-level output from the tape level output. (more…)