Tag: 888

8-Series v9.20 Firmware

Download Firmware

Note: To ensure best performance, always run the latest version of 8-Series firmware with the latest version of SD-Remote.  

New 

  • Added auto-resume file upload capability. Now if the connection to frame.io is lost while a file is uploading, when the connection is automatically re-established, the file will continue to upload from where it left off rather than starting again. This saves time and prevents duplicate file entries in frame.io 
  • Support for 4 channels of digital audio per slot from the Lectrosonics DSR4 to 8-series via SL-2. Note: Superslot control not supported in this firmware release. 
  • Added option to gray out meters for CL-16 disarmed ISO and Bus tracks. 
  • Support for the SL-MixFace controller. 

Changed 

  • Solo Follows Select On/Off now affects CL-16 as well as 3rd Party MCU controllers. 

Fixed 

  • Output delay is now applied to both A1 and A2 outputs of Scorpio’s 10-pin A Output. 
  • CL-16 menu button no longer stays illuminated after using it in conjunction with pressing knobs for muting channels, buses, and outputs. 
  • Add fixes to support new Waves Fit hardware and firmware v2.03. 
  • Fixed rare issue where slot receivers would not power up in an SL-2. 
  • Channel 1 and 3 labels are now centered on the LR,1-3 horizontal meter screen. 
  • Eliminated a rare lockup that could result from playing back monophonic files. 
  • Occasional loud pops on headphones when powering on or off have been eliminated. 
  • Virtual channel trim and fader values are now saved on power down. 

8-Series v9.10 Firmware

Download Firmware

Note: To ensure best performance, always run the latest version of 8-Series firmware with the latest version of SD-Remote.  

New 

  • Added support for the A20-Nexus 8-, 12-,16- channel digital receiver including channel source selection, GainForward trim gain range, wireless channel names, and more. 

Fixed 

  • The CL-16 Com 2 button is now mapped by default to the 888’s Com 2 Send function. 

8-Series Compatible Controllers

The following controllers are compatible with the 833, 888, and Scorpio portable mixer-recorders.

  • CL-16
  • CL-12
  • Sonosax SX-LC8+
  • Icon Platform M+
  • Icon Platform X
  • Behringer X-Touch
  • Waves Midiplus Fit

Products Mentioned

833

Learn More

888

Learn More

Scorpio

Learn More

8-Series Firmware 9.00

Download Firmware

Release: Oct 5 

Note: To ensure correct performance, always run the latest version of 8-Series firmware with the latest version of SD-Remote.  

New 

  • Support for new SD-Remote features inc. bus/output metering, control, and routing. 
  • Support for the Waves FIT 16-channel controller  
  • Main Fader functionality is now supported for controllers equipped with them.  
  • Support for Com Send 2 on the 888  
  • Support for Behringer X-Touch Channel Metering  
  • Added LR, Returns meter view for the 833  
  • Added MS Spread Control option in the Channel Setup menu for allowing the 8-series front panel even channel trim pot to control the MS Spread for MS linked channels. 
  • Add support for mapping channels 9-12 to a second controller when using the 833 +4 plugin.  
  • New Spill and Individual modes for multiple controller configurations. 

Change 

  • The following functions have moved into the new Third-Party Controller menu: 
  • Require Shift For Arm 
  • Require Shift for Mute 
  • Solo follows Select 
  • Channel source can now be changed while recording.  
  • “Erase/Format SSD” menu name changed to “Erase/Format Internal SSD” to make it more obvious when formatting the internal drive.  
  • Added extra popup during the internal SSD formatting process to reduce likelihood of accidentally formatting the internal drive.   
  • The Phrase List is now enabled in the SD card Volume Label virtual keyboard screen for quick custom naming of SD cards.  
  • Unlinking MS or Stereo pairs sets odd and even channel pans back to center.  

Fixed 

  • Output mute status is now displayed correctly after a record, stop, or play output auto-mute. 
  • 8-Series no longer goes unresponsive when “Read” is pressed on Icon M+ or the XTouch.   
  • In EQ Mode, VPot 2 now toggles between Off, Pre, Post. 
  • EQ Mode Q value now updates from an ICON controller. 
  • While viewing the FAT Channel, the controller VPots now toggle channel routing from Off, Pre-fade, Post-fade, and Send.   
  • Front panel trims and faders no longer go unresponsive with soft trim /fader pickup enabled.  
  • The controller ‘Learn’ function is no longer unresponsive while in record mode.  
  • The XTouch footswitch can now be mapped to control 8-Series functions.  
  • Inability to access SuperSlot Receiver Setup Screens from Receiver Overview after receiver boots up, no longer occur. 
  • Transmitter parameters (name, model etc.) are now detected correctly by an A10-RX/A20-RX after an RF Scan.   
  • ** + Select and ** + HP Toggle Switch Actions for fader control now work with the CL-12.  
  • Fixed condition where the CL-16 would lock up when 8-series was set to VU meter ballistics with no peak hold.  
  • Fixed issue that prevented the ability to adjust output gain down to -inf with the CL-12  
  • Improvements to prevent a rare issue where settings could inadvertently reset to factory defaults after a power cycle. 
>