Tag: MixPre-10 II

MixPre Knob

Made By: Lom Audio.

Dimensions: 12mm diameter, 8.5mm internal diameter.
Material: PETG (froggy green, hi-vis orange and black), PLA (crystal).
Compatibility: MixPre-3, 6, 10 (both T and M versions, both I. and II. generation).

The knob is friction-fitted on the original knob, no need to modify your device.

Soundbag Dashboards

Made By: Soundbag Dashboards.

Soundbag Dashboards can help you create your ultimate production sound bag.  

Just like the dashboard of your vehicle, Soundbag Dashboards place all of the audio gear you depend on, right in your line of sight, ensuring you can quickly and easily monitor your equipment. Soundbag Dashboards are designed to mount to your audio mixer and lay out your wireless receivers right in front of you for easy viewing and access. Some models also feature the ability to mount DC power distribution systems including the Remote Audio RM remote, the Battery Bud and various Audio Root models.

Now with our new Modular Dashboard System, you can choose exactly how you want to build your Soundbag!

Custom Glow Pots Color-Coded Knobs For MixPre

Made By: Bioluminous.

These are custom replacement knobs for all models of the Sound Devices MixPre line. They will work on the 1st and 2nd generation of the MixPre 3 / 6 / 10. They will not work on any other Sound Devices models. The knobs are custom-designed by us and produced using the best materials available. These knobs are only sold by Bioluminous and not available anywhere else.

We created these knobs to have several features:

  • Bottom part has thick glow-in-the-dark part for easy viewing on dark sets and studios
  • Top part is in the color you choose and the color is viewable from all angles
  • Knob is sculpted to make it easy to adjust based on feel without looking
  • Top has embedded stainless steel screw to allow for easy one-finger adjustment

You choose the colors you want. There are 32 color choices available so you can be sure to be able to match your existing color scheme. Each knob purchase includes two knobs of the same color, one is reversed for use on the top row of the MixPre 10 series only. Choose the color you want from the item picker at the top of the page. Select quantity and add to cart. Then repeat for the other colors you want.

Headphones Knob Grip Flex Sleeve For MixPre

Made By: Bioluminous


  • Flexible sleeve fits tightly over existing knob (recorder not included).
  • Sleeve does not interfere with headphone port (recorder not included).
  • Shown installed on recorder (we also offer colored knob sleeves – recorder not included).

The new MixPre II series comes with a soft, black rubber sleeve that makes using the headphone encoder extremely easy with just one finger (no more tweaking your fingers down the edge of your bag just to make adjustments!). But the sleeve is very soft and easily lost.

This replacement sleeve is made of a flexible plastic that is harder than the original, but still soft on the fingers and easy to attach. It just presses into place and stays put. The design is a copy of the factory supplied version and was re-created by us in-house. Made in red to match the other colors and also to be easy to find in a sound bag.

MP6-SL2 Mount

Made by: Dhun Designs.

The MP6-SL2 is an integrated mount for a MixPre6 which distributes audio and power via the DB25 connectors on the bottom of most major two channel receivers.

The MP6-SL is a dashboard style solution that was designed to be as compact as possible. Allowing users to seamlessly integrate and switch different receivers in and out of the Mix Pre 6 without needing to reach into the bag and mess around with cables and connectors.

No more changing your DB25 superslot plate when switching receivers between cart or bag rigs!


Audio distribution

  • via 4x TA3 Outputs allowing for quick swapping of cables if there is a fault.

Power distribution outputs

  • On 2x Hirose 4 pin connectors
  • Allows a single loop out for the Mix Pre 6 and a spare Hirose for powering auxilary devices like links

Power Input

  • A single Hirose 4 pin connector distributes power to all devices negating the need for a distro or multiple cables.

Optional Cable Pack


  • 4x Ta3 to XLR Right angle cables (All black caps)
  • 1x Hirose 4 to Hirose 4 (please specify if you’d prefer a longer cable for the Sound Devices right side power entry)

MixPre II Live Demo & QA

Jun 19, 2023, 11:00 AM
Online US

Join us on June 19th, 2023, at 11:00am CDT, for a very special live stream event featuring our MixPre II Series of mixer-recorders. Laura Sillanpää, Sound Devices Technical Support Specialist, will walk you through all the features available to you in the devices’ Advanced Mode. Whether you’re just getting started using a MixPre II mixer-recorder or you’ve used one for years, Laura will help you feel more comfortable working with inputs and outputs, deciphering timecode, understanding record settings, entering metadata, and choosing appropriate plugins.

You can register by filling out the form below.