- New
- For all models:
- Output gain range increased by 20dB.
- Added Output Mute option.
- Added Output Mute * shortcut option.
- For MixPre-10M:
- Import of WAV audio files (native and non-native) when creating a Music Project.
- For MixPre-10T:
- Displays a timecode reset notification in Free Run and Time of Day modes when timecode is reset after the timecode hold time of 4 hrs is exceeded.
- For MixPre-3 and MixPre-6 only:
- Jump to cue marks by holding Play and rotating the headphone encoder.
- For MixPre-3, -6, and -10T only
- Plugin support: A new System > Plugins submenu for installing future licensed plugins.
- New Record > Record Bells menu option to disable record bell notifications.
- Added Inputs MS Decode submenu to select MS decoding to both ISOs and Mix or Mix Only.
- Recordings that are split across multiple files now playback seamlessly.
- Playback of non-native WAV files in Audio Projects.
- Changed
- For all models:
- Channel Screen meter remains visible and active when adjusting channel gain.
- Headphone Clip Indicator is now displayed in power/battery level indicator in the top right of the screen.
- Post fade channel clipping is now indicated by a channel’s ring LED illuminating red.
- Projects are now sorted by creation date/time in the Project > Open menu.
- Menu screens now allow the user to switch from one parameter to another with a single touch.
For MixPre-3, -6, and -10T only:- A file’s ‘Name’ has been increased to a maximum of 20 characters.
- Fixed
- For all models:
- Jumping between cue marks has been improved.
- Media I/O Error message was incorrectly displayed for a full SD card.
- In some DAWs, MixPre audio file signal clipping was occurring at -0.1dBFS.
- Zero byte split files were created on some SD cards.
- Pop-up dialog windows could appear one on top of the other.
- Improved handling of pop up dialog boxes.
- Improved audio scrubbing.
- Improved transport handling.
- Improved media performance.
- For MixPre-10T only:
- USB Thumbdrive was prematurely shown as full.
- Time of Day timecode was incorrect after power cycling within the timecode hold time (4 hours).
- For MixPre-10M only:
- Mute was not muting tracks with Input source set to Click.
- Metronome Volume and Click track level were inconsistent.
- Rendered audio files were not automatically copied to the USB Drive.
- Cue marks that fell outside of the Play In / Stop region were still embedded in the rendered wav file.
- Cue marks set as Play In, Record In, Record Out, Stop were not being moved correctly.
- Rendered isolated wav files would occasionally contain discontinuities at crossfades.
- Phantom Power setting was not carrying over to the linked input in a linked pair.
- Playback would not always work after recording the first take in a music project.
- 44.1 kHz sample rate would not carry over to new projects.
- For MixPre-6 and -10T only:
- MixPre-6 channels 5 & 6 and MixPre-10T channels 9 & 10 were displaying 6dB too high.
- Solo and Mutes were not linked when Link Type was set to ‘All’.
- For MixPre-3, -6, and -10T only:
- Audio bleed-through into the record start/stop bells.
- MS balance control was occasionally resetting to center.
- Cue marks were not copied from the original file to the re-recorded file.
- Track Arm indicators would flash after playing back.
- Phantom Power setting could be displayed incorrectly in the Channel screen after playback.
- Re-recording was only possible when the source file contained three or more tracks.
- Headphone monitoring source would change after playback.
- Previous project was not loading when reinserting the SD card.
- Recording would stop when recording automatic file splits to daily folders over midnight.
