Downloads

788T Firmware v1.75

New Faster power on (boot up) and ready to record, even with thousands of files on media. Support for the CL-2 Remote Fader accessory Input: Fader Range menu. Allows user to select the dB range of the mixer faders. There are three options: i) Wide (off to +15 dB). This is the default and the […]

Read The Full Article

788T Firmware v1.71

New Track-to-Media feature in the Track Setup Menu enables user to route any track to any media in any combination. E.g. Route MIX + ISO tracks to the internal hard drive and MIX tracks only to DVD-RAM Tone record lock menu allows user to enable tone activation during record Alternative option for routing inputs to […]

Read The Full Article

702T Firmware v2.63

New LCD scrolling direction menu enables user to select which direction the rotary encoder scrolls through the menu Changed Enhanced write algorithm to significantly improve real-time multi-track recording to DVD-RAM even while simultaneously recording to 2 media Fixed Drive warning corrupt file bug

Read The Full Article

702T Firmware v2.61

New Periodic, automatic file header saving during recording to preserve WAV file integrity in the event power is lost during recording. Does not apply to FLAC or MP3 recording. Menu option to allow display of gain settings instead of sample rate/gain in the LCD. Latching tone – press and hold tone button >2 secs to […]

Read The Full Article

788T Firmware v1.65

New Sampling rates of 88.2 kHz and 96 kHz, for up to 8-track recording to 2 media simultaneously. Latching tone option. A quick press of tone button latches the tone oscillator on, long press is momentary action. “Tape” metadata defaults to date if Tape (mid-level) folder is set to NONE. Important for AVID/TITAN/PROTOOLS EDL based […]

Read The Full Article

702T Firmware v2.54

New Added beeps to Rec-Pause Mode, so beeps occur when recording is paused and un-paused. Fixed SPEED and TAKE tags were sometimes not written the BEXT chunk when the recorder was in EXT_TC AUTO or EXT_TC/CONT AUTO. This bug did not affect the iXML tags – they are always correct The REC: Timer Start/Stop function […]

Read The Full Article