Support
788T Firmware v2.00
New Support for the CL-9 Linear Fader Controller Single band parametric EQ for each input (CL-9 only; not available at SR > 48048 Hz) Variable pan for each input into the LR mix tracks (CL-9 only) Track and output soloing (CL-9 only) Output muting (CL-9 only) Slate can be routed to any track or output […]
Read The Full Article552 Firmware v1.1
New Split ear return metering Record timecode-to-track feature Auto record feature – on timecode advance Record-pause feature Take counter reset hot key. (PFL5 + Stop + Battery Check) Stop Mode Only Polarity reverse hot key sequence timeout so the user can execute function with one hand Slate mic to output on digital outputs if they […]
Read The Full Article702T Firmware v2.65
New Firmware revision number shows in boot up splash screen. Ability to mark a take as ‘NG’ (No Good). Typically used to identify a take as not the one to be used in post, although there may be sections of it which may be useful. Data stored in the iXML chunk. STOP+LAMP shortcut for quick […]
Read The Full Article788T Firmware v1.76
New Improvements to limiter algorithm Independent pre-fade and post-fade limiters; post fade levels that exceed the limiter threshold do not affect pre-fade level. L/R track limiters. Can be linked, unlinked or disabled in the Master Levels page in the Track Setup Window (press INPUT key). Aux1/Aux2 track limiters. Can be linked, unlinked or disabled in […]
Read The Full Article788T Firmware v1.75
New Faster power on (boot up) and ready to record, even with thousands of files on media. Support for the CL-2 Remote Fader accessory Input: Fader Range menu. Allows user to select the dB range of the mixer faders. There are three options: i) Wide (off to +15 dB). This is the default and the […]
Read The Full Article