Downloads
All images and text are the property of Sound Devices, LLC and protected by copyright. Documentation, firmware, and images are provided for the personal use of our customers. Any unauthorized reuse without the express permission of Sound Devices is prohibited. Please respect Sound Devices’ copyright to the material contained on this page. Misuse or misrepresentation of Sound Devices’ images and property is illegal.
In order to keep you up-to-date on critical firmware updates, we require a valid email address.
633 Firmware v4.61
Released: January 08, 2020
Download v4.61Fixes
- Improved SD Card write performance
- Various system enhancements and improvements.
633 Firmware v4.60
Released: January 30, 2019
Download v4.60- New
- Auto-Mute feature provides the option of automatically silencing the X1-X4 outputs when in stop mode.
- Fixed
- Rare event where takes disappeared after renaming has been eliminated.
- Known Issues
- Auto-Mute timecode modes output timecode for a few seconds after booting up from a full shutdown.
- Sound Devices has worked directly with Delkin to identify an intermittent Media I/O issue with newer Delkin CF 500x and CF 700x cards. Delkin has confirmed that a recent change to these two cards is most likely responsible for the errors. Cards containing KZ in the serial number are susceptible to this issue and should not be used. Cards containing VB in the serial number will function correctly and are approved. Deklin CF 1000x and 1050x cards do not experience this issue and may continue to be used. Click here for the 6-Series Approved Media List
633 Firmware v4.51
Released: April 20, 2017
- New
- Support for Wingman app v2.00 which includes:
- Optional password-protected control of the 633
- Landscape orientation for iPad
- Various other fixes and improvements
- Added Wingman Password menu (in the 633 System menu) for setting a password that will then have to be entered in Wingman to gain control of the 633.
- Support for Wingman app v2.00 which includes:
- Fixed
- Media slow errors due to SD/CF card overfill.
- Rare event where white noise would appear on outputs and headphones when MixAssist was enabled.
633 Firmware v4.50
Released: February 22, 2017
- New
- Auto Mixer
- Dugan Auto Mix
- MixAssist
- Ctrl+T keyboard shortcut to toggle tone On/Off
- Auto Mixer
- Changed
- High-Pass Filter now returns to last used value when toggled on and off rather than always reset to 150Hz.
- Recording of 192 kHz monophonic wav files is no longer allowed. In previous firmware, recording was not prevented even though it was classed as an unsupported mode. Set to polyphonic when recording 192 kHz.
- Fixed
- Long file names on exFAT formatted media are truncated. Factory Option for Scene Name can be overwritten by user if Scene Name is edited during record. This can cause Scene Increment Mode to stop working.
633 Firmware v4.01
Released: October 18, 2016
- Fixed
- Wingman meter response is sluggish when WM-Connect is connected to the CL-12 Keyboard port.
- Fixed in Wingman v1.01:
- Wingman meter response is sluggish when WM-Connect is connected to the CL-12 Keyboard port.
- Wingman display and metadata errors with 6-Series after the app has been brought in and out of Standby Mode.
- iPad Pro 12.9” minor display issue in the Devices Found page.
- Intermittent issue where Track Arm status shows incorrect state at sample rates 88.2kHz and above.
- Track arming display inconsistencies.
- NOTE: Requires updating the Wingman app to v1.01. It is important that, before launching Wingman, the 6-Series mixer is running v4.01 and the Wingman app on the iOS device is updated to v1.01
633 Firmware v4.00
Released: September 09, 2016
- New
- Support for Wingman, an iOS application by Sound Devices, LLC and the hardware accessory, WM-Connect, a Bluetooth® Smart USB dongle.
- Wingman is a free iOS application available as a download from the Apple® App Store.
- WM-Connect is an optional hardware accessory that connects to the 688 USB Port via USB B to USB A adapter or directly to CL-12 Keyboard port. The Bluetooth Smart device automatically pairs with mobile devices running iOS v8.0 or later.
- From the Wingman app, you can:
- Remotely control Record, Stop, False Take, and Circle commands
- View Audio Metering, Timecode, Absolute time, Record Status, and more
- Arm/Disarm Tracks for recording and manage track naming
- Edit metadata of upcoming, current, and up to 50 previous recorded takes, including: scene, take, notes, track names, etc.
- Manage, Create, and Email Sound Reports
- Support for Wingman, an iOS application by Sound Devices, LLC and the hardware accessory, WM-Connect, a Bluetooth® Smart USB dongle.
- Fixed
- Pressing Meters button from Take List>Take Edit screen returns UI to the wrong MeterView.
- Reduced the likelihood of unit locking up when powering down.
- Reduced the likelihood of date/time corruption.
633 Firmware v3.10
Released: July 05, 2016
- New
- Support for 3rd party wireless control, timecode and metadata management including:
- Timecode Systems :WAVE and PureBlend's MovieSlate® iOS app
- Ambient® Master Lockit.
- New menu option to disable the CL-12 Output level controls (L, R, X1 and X2). Options for MENU > CL-12 > L-X2 Gain Pots include: Enable or Disable.
- Take Designator can now be set to any alpha character or '-' (T is default) in MENU > FILE STORAGE > Take Designator.
- Support for 3rd party wireless control, timecode and metadata management including:
- Changed
- Behavior to PFL action when in Input Settings > Edit Channel # Name screen. Now when selecting the same PFL, the track name reverts to the previous entry and returns to the Input Settings screen. Selecting another PFL cancels name changes and provides immediate entry to the new channel's Input Settings screen.
- While recording, the Take List's Circle option for the Current Take is no longer available.
- Fixed
- Arming paired LR or X1/X2 tracks using the CL-12 LR, X1/X2 pots did not correctly operate on the pairs.
- Track Name entries from Input Settings Window would not hold if that track name already existed.
- Channels turned off from the CL-12 were reverting back to On after a power cycle.
- Some channel fader values, if attenuated to -infinity after power down, are not correctly applied after powering unit on.
- CL-12 Mix Bus Track LEDs could get out of sync when linked.
633 Firmware v2.11
Released: February 17, 2016
- New
- Support for the new CL-12 Linear Fader Controller, including:
- 12 100 mm linear input faders (Penny & Giles option with CL-12 Alaia)
- L, R, X1, X2 level control, routing, arming, and 22-segment metering inc. limiter activity
- 1 Com private line circuit
- Numerous quick-access buttons to key functions inc. metadata, transport, TC, coms/returns, arming, routing, etc.
- USB ports for keyboard and lamp
- Three user-programmable buttons
- A new CL-12 sub-menu
- And much more...
- Note: Not included with the CL-12, a micro USB power cord (5V) must be connected to the CL-12 DC Power Boost port in order to operate with the 633.
- Added QR Codes for smart phone access to online documentation including Approved Media List and User Guide. A QR code reader app is required.
- New User Bit mode allows jamming of External Timecode User Bits.
- Support for the new CL-12 Linear Fader Controller, including:
- Fixed
- In the File List, FAT32 media files would incorrectly display modified time instead of creation time.
- Previously, there was a date corruption issue with ExFAT formatted media containing more than 200 files.
- Keyboard sequence involving Shift key would sometimes repeat the same character as if the key was being held down.
- Lock up when adding notes exceeding the 200 character limit.
- Scene name shortcut (HP + RTN) editing factory the "None" option option causing "None" to disappear and breaking Scene Increment Mode.
- When UBits are set to one of the date modes the UU field metadata stamps were following the take number.
- UBits UU fields are now restored after loading user setup files.
- Added a recheck of the real time clock to prevent false “System date error detected. Please reset time and date.” messages from appearing at boot up.
633 Firmware v1.04
Released: February 15, 2015
- New
- Added [METERS + MIC] shortcut to quickly access the Timecode Jam Menu.
- Added ability to adjust slate mic gain. Adjust from the System/Slate Mic Gain menu or by using the [MIC + HP Turn] shortcut.
- Added new 'Free Run Jam Once' Timecode Mode.
- Added ability to lock out X1 and X2 routing from the Input Settings Window to prevent accidental mis-routing.
- Added ability to quickly clear the entire scene list, rather than by deleting individual entries. Select the Next take in the Take List, choose EDIT, then Scene, then <Clear List>.
- Changed
- L-Ident tone now goes to X1 and X3 outputs as well as the L output.
- Scene Name Shortcut now edits current entry rather than adds a new entry, preventing unnecessarily long scene name lists.
- Fixed
- Various system optimizations and improvements.
- User Bits UU values are now held over power cycles.
- Incorrect file date stamp fixed when recording to exFAT-formatted cards.
- General clean up of scene and trackname editing bugs.
- Timecode Jam Menu display incorrectly showing a difference with drop frame.
- Fixed lock up when media is pulled during a copy process.
- Activating an input during record was incorrectly showing track as armed.
- Fixed intermittent lock up related to shutting down when exFAT media mounted.
- Fixed lock up when mounting a corrupt CF/SD Card.
- USB port is now reset when the 633 detects an unresponsive keyboard.
- Fixed intermittent lock up when power cycling with a keyboard attached.
- Fixed lock up when power cycling with Daily Folder Prompt displayed.
- Fixed lock up when loading factory defaults with all channels set to off, sample rate set to 192k and AES Outputs active.
633 Firmware v4.60
Released: February 28, 2014
- New
- Added X1X2 routing menu including the ability to route L and R on the X1 and X2 outputs.
- Added new Timecode modes, 'Free Run Auto Mute' and '24h Run Auto Mute'. These modes operate just like Free run and 24h modes, but mute the Lemo LTC timecode output when recording is stopped. This can be used to roll external devices when Rec run timecode is not suitable e.g. multi-cam shoots.
- Added shortcut for super-fast scene name editing. Pressing HP encoder + RTN during record edits the current take's scene name. Pressing HP encoder + RTN during stop edits the next take's scene name.
- Added User Bit modes including support for automatically inserting the date into User Bits.
- Added Headphone Preset List menu in the System menu. This adds the ability to customize how many and which HP presets show in the HP preset List. Ideal for setting up the HP preset list for reduced scrolling and quicker access to presets.
- Added support for the wireless mini keyboard Rii / RT-MWK01, ideal for use as a compact remote control.
- Fixed
- Lock up when deleting notes form files recorder as MP3 to one media and WAV to the other.
- Various system and media optimizations improving performance with monophonic file recording.
633 Firmware v1.01
Released: December 03, 2013
- Fixed
- Fixes issue where when powering up from sleep mode, the audio output of the 633 may be 10 dB to 20 dB low or sometimes too high.
- Potential issue where record bell and subsequent recorded files could be distorted.
- Fixes issue where deleting Notes from a take that is recorded as WAV on one media and MP3 on the other media resulted in a lock up.
- Fixes lockup that could occur when switching between certain settings files.
633 Firmware v1.00
Released: November 19, 2013
Initial release
Show Previous Releases
Hide Previous Releases