New
- Ability to set the WiFi channel number of the CL-WIFI in the CL-WIFI: Configure menu.
- Passphrase warning. WEP64 security requires the use of a 10-character passphrase. The 788T now issues a 'Failed' warning upon exit from the CL-WIFI: Configure menu should the user's passphrase fail to meet this requirement.
Fixed
- Pan control issues when inputs are stereo or MS linked.

788T Firmware v2.18

Last updated April 2, 2019

New
- Ability to store, name, and load unlimited user setups. Active settings are automatically embedded in every .WAV file and can be loaded from the Take List or Drive Directory.
- Ability to quickly arm/disarm a track using the switch position on the front panel trim pot while maintaining a fixed trim gain setting. Use the new 'Input Enables Only' option in the 'Input: Front Panel Controls' menu.
- Output Delay feature for outputs 1 and 2. Delay ranges from 0.0 to 10.0 time code frames.
- Mix Assist Mode option, On (LR tracks only). Mode allows user to simultaneously create both a mix-assisted mix on LR and a manual mix on any other track set to post-fade. Note: the original MixAssist Mode, 'On' is now called 'On (All tracks follow LR)'. In this mode, all post fade tracks are affected by MixAssist.
Changed
- LCD contrast is not reset by factory defaults. Reset only by initialize function on bootup.
- Factory default input-to-track routing changed to '2 mix (L,R), 8 Iso (A-H)' with 10 tracks armed.
Fixed
- Error conditions displayed incorrectly.
- In rare circumstances with MixAssist, unused mics still contribute to NOM calculation, reducing overall gain.
- With Mix Assist active, channels with fader gains turned completely down (-inf) not being removed from Mix Assist, preventing the last open mic from staying active.
- Outputs not active after factory reset.

788T Firmware v2.16

Last updated April 2, 2019

New
- Mix Assist - an automix function which turns unused microphones off.
- Input Linking '5-8' option in menu 18.
- Option for 48V phantom on mic inputs only to help prevent inadvertent damage to vulnerable line sources. Options are now 48V (mic only), 48VL (line and mic) and Off.
Fix
- Prevented entering certain characters (/, \, <,>, &, %) in Sound Report menu which could cause various issues relating to missing data in Sound Reports and potential lockups.
- Some rare errors could display incorrect error messages on the LCD.