Output Setup for SuperSlot Receivers
When using SuperSlot receivers with the SL-6, some receiver settings are automatically set by the mixer for optimized performance.
For the Lectrosonics SRB, these settings include:
Receiver | Setting | Description |
Lectrosonics SRB | SETUP > LEVEL = +2 | To achieve optimal audio level and to match the SRB output to the mixer’s input stage for best dynamic range, the 688 automatically sets the SRBs gain level to +2, and the phase to +. |
– | SETUP > PHASE = + | There is no reason to manually set the SRB to any other level. Use the 688’s trim pot to make any necessary adjustments. |
For the Wisycom MCR-42S, these settings include:
- MENU > Advanced > LINE Mode = AES-3
- MENU > Advanced > Edit RX1/RX2 > Audio Out > AES3 max lev = 0 dBFS
- MENU > Advanced > Edit RX1/RX2 > Sig. phase = 0°
- The following settings are applied whenever some of the receivers in the SL-6 are not AES-3 compatible:
- MENU > Advanced > LINE Mode = Analog
- MENU > Advanced > Edit RX1/RX2 > Audio Out > LINE max lev = 2 dBU
- MENU > Advanced > Edit RX1/RX2 > Sig. phase = 0°