Output Setup for SuperSlot Receivers

When using SuperSlot receivers with the SL-6, some receiver settings are automatically set by the mixer for optimized performance.

For the Lectrosonics SRB, these settings include:


Receiver

Setting

Description
Lectrosonics SRB

SETUP > LEVEL = +2
To achieve optimal audio level and to match the SRB output to the mixer’s input stage for best dynamic range, the 688 automatically sets the SRBs gain level to +2, and the phase to +.
SETUP > PHASE = + There is no reason to manually set the SRB to any other level. Use the 688’s trim pot to make any necessary adjustments.

For the Wisycom MCR-42S, these settings include:

  • MENU > Advanced > LINE Mode = AES-3
  • MENU > Advanced > Edit RX1/RX2 > Audio Out > AES3 max lev = 0 dBFS
  • MENU > Advanced > Edit RX1/RX2 > Sig. phase = 0°
  • The following settings are applied whenever some of the receivers in the SL-6 are not AES-3 compatible:
  • MENU > Advanced > LINE Mode = Analog
  • MENU > Advanced > Edit RX1/RX2 > Audio Out > LINE max lev = 2 dBU
  • MENU > Advanced > Edit RX1/RX2 > Sig. phase = 0°
The above settings are applied only when all receivers in the SL-6 are AES-3 compatible: