552 Specifications

Last updated

Click on each group to expand. Specifications are subject to change without prior notice.

Analog Inputs
  • Frequency Response
    • 10 Hz – 50 kHz, +/-0.5 dB
  • THD + Noise
    • 0.09% max (50 Hz – 20 kHz, +18 dBu at line out, fader fully up)
  • Equivalent Input Noise
    • -126 dBu (-128 dBV) maximum. (22 Hz – 22 kHz bandwidth, flat filter, trim control fully up)
  • Maximum Input Level
  • Maximum Gain
  • Input Type

Analog Outputs
  • Output Impedance (ohms actual):
  • Line Output Clipping Level: (1% THD)
    • 20 dBu minimum with 10k load
  • Maximum Output Level
  • Output Limiters
    • Affects the outputs of the mixer
  • Threshold selectable from +4 dBu to +20 dBu, 1 dB steps, 20:1 limiting ratio, 1 mS attack time, 
  • 500 mS release time.

AES3 Output
  • Balanced AES Out A,B on XLR connectors, 110 ohm, 2 V p-p, AES and S/PDIF compatible with RCA adaptor

Recording
  • Recording Media Type
    • Secure Digital High Capacity (SDHC), Secure Digital (SD) FAT32 formatted, will format media on-board
  • Recording File Type
  • Sampling Frequency
    • 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • A/D
    • 24 bit, 96 kHz maximum sampling rate
  • A/D Dynamic Range
    • 103 dB, A-weighted bandwidth typical

Time Code
  • Reads external timecode received and stamps BEXT/iXML header for WAV, stamps ID3 tag for MP3 Time Code

Powering
  • internal ±16 V (bi-polar) regulated audio rails, 3.2-8 V range internal batteries, isolated (floating) external DC input jack, 5-18 V Locking 4-pin Hirose connector, pin-4 = (+), pin-1 = (-),

Temperature
  • operating: –20°C to 60°C, 0 to 90% relative humidity; (non-condensing), storage: –40°C to 85°C

Metering
  • 42 segment, sunlight-viewable, selectable Peak, VU, or Peak + VU ballistics

Weight
  • 2.0 kg, (4 lbs 6 oz.) unpackaged without four alkaline AA batteries

Dimensions
  • 53 mm x 279 mm x 168 mm (H x W x D), 2.1” x 11 x 6.6″