- New
- Support for the SL-6 Powering and Wireless System.
- Headphone level range extended from -30dB to -42dB.
- Extra 6dB of trim gain available to line inputs 7-12.
- Phase inversion now available for all 12 inputs (1-6 in Input Settings Window and 7-12 via Main Menu>Inputs>Input 7-12 Phase).
- Added QR Codes for smart phone access to online documentation including Approved Media List and User Guide. A QR code reader app is required.
- New User Bit mode allows jamming of External Timecode User Bits.
- Changes
- Word Clock In Termination menu name changed to Word Clock Sensitivity. Menu options are High (no termination) and Low (75 ohm termination).
- Added notification to change the internal real time clock battery when it is low.
- Fixed
- User assigned headphone presets using prefade Iso signals would switch to post-fade when Mono was selected.
- Tape Out wouldn’t return to the correct Tape Out Source menu setting after RTN Loopback Mode was activated.
- Limiter activity for inputs 1-4 incorrectly showing on X3-X6 output meter page.
- Reduced pop in headphones going from headphone source to return for the first time.
- Intermittent problem where LCD could boot up solid black or with missing colors.
- Sound report track names for X1 and X2 being written on track 9 and 10 respectively.
- Intermittent issue where digital readout of trim values at power up would be incorrect.
- Scene name shortcut (HP + RTN) editing factory the “None” option option causing “None” to disappear and breaking Scene Increment Mode.
- When UBits are set to one of the date modes the UU field metadata stamps were following the take number.
- UBits UU fields are now restored after loading user setup files.
- Headphone monitor levels were too low when the tone generator was active.
- Internal tone generator was overriding RTN signal in headphone monitor.
- Lock up when adding notes exceeding the 200 character limit.
- Keyboard sequence involving Shift key would sometimes repeat the same character as if the key was being held down.
- In the file list, FAT32 media files would incorrectly display modified time instead of creation time.
- Output delay frame calculation error.
- Intermittent issue where AES trim gain range was not the same across all channels.