Firmware

8-Series Firmware v8.50

Note: To ensure best performance, always run the latest version of 8-Series firmware with the latest version of SD-Remote. New SuperSlot support for the Shure ADX5D when connected to the 8-Series via SL-2 or the Scorpio via SL-6. Use the 8-Series interface to set frequency, start and view RF scans, view RF history, edit parameters […]

Read The Full Article

8-Series Firmware v8.12

Note: To ensure best performance, always run the latest version of 8-Series firmware with the latest version of SD-Remote. New Take List shortcut option added to * and ** Toggle Switch menus. Change Bus Names character limit increased from 12 to 20 characters.  Fixed 888 no longer falsely displays “Unit is overheating” error messages shortly […]

Read The Full Article

Astral Mini Firmware v1.10

Note: To ensure best performance, always run the latest version of Astral Mini firmware with the latest version of Astral Remote.  New Astral Remote now indicates when Astral Mini is powered off and holding timecode. Change ID Mode now flashes all blue LEDs (except the Audio LED).  Fixed Improved Bluetooth connection and disconnection process. ID […]

Read The Full Article

8-Series Firmware v8.11

Note: It is required to run SD-Remote v8.11 with 8-Series firmware v8.11. Changes Daily Folder prompts now appear immediately after boot up or after midnight when a recording is stopped. If New is selected, all following takes are sent to the new daily folder. If previous is selected, all following takes are sent to the […]

Read The Full Article

MixPre Firmware 7.14

New Added 100 Hz Low Cut Filter option. Fixed Gain ranges are now always correctly applied after loading settings.  Ring LED brightness is no longer affected by channel mute status. Opening a Song Project from Audio Mode no longer incorrectly opens the last Song Project instead of the selected Song Project. 

Read The Full Article

A10-RX Firmware v4.02

Note: A10-RX should be updated using SD-Utility (Mic2Wav replacement software), 8-Series v8.10, or 688 v4.70. It is recommended that you restore settings after updating the A10-RX to v4.00+. Fixed Audible click when changing Input Low Cut between Off and 40 Hz no longer occurs.

Read The Full Article