Changing the TOD / Time Code Battery for a 7-Series Recorder

Q: How do I change the internal AA time code/time-of-day battery on a 7-Series recorder?

A: Changing the internal AA battery is a simple process outlined here in a step by procedure:

#batterySteps img { margin: 1em 0 2em; } #batterySteps li { font-size: 1.5em; } #batterySteps .alert { font-size: !important; }
  1. Obtain the correct battery: A rechargeable AA battery with NiMH chemistry.

  2. Place recorder upside down on a steady flat surface.

  3. With a Phillips head screwdriver remove the screws on top.

    744T Upside Down with Screw Driver

    Remove and Install screws in this order to avoid stripping.

    7-Series Screw Order
  4. Gently remove the bottom panel. As you remove the bottom panel be carefull of the internal AA battery wires as they will remain connected to the internal circuitry and the bottom panel.

    744T Removing the Bottom Panel744T Bottom Panel Open744T Internal AA Battery Close Up
  5. Using a screwdriver, loosen the green battery retainer board and twist it away from the battery holder. Remove the used battery and replace it with a fresh one. Twist the battery retainer board back into place and tighten the screw.

  6. Replace the bottom panel, making sure the tabs around the perimeter line up and hold with one hand while replacing the screws. Tighten the screws down making sure they are flush with the unit.

  7. Give the unit a final looking over to make sure everything is aligned properly.