The MixPre-6 now offers 4-channel linking. (This feature is only available on the MixPre-6.) When channels 1-4 are linked, gain, fader, limiters, track arming, low cut filters, and input delay are all linked and controlled from Channel 1 screen and knob.
Note: Available options vary based on set mode.
Input Delay, a feature already available on the MixPre-6, is now supported on the MixPre-3. Available on channels 1-3, adjustable from 0 to 30 ms in 1 ms increments.
Changed
Yhe Linking feature was moved from Custom Setup > Gain > Advanced to Custom Setup > Channel > Advanced. This change now lets you link inputs while still having the option of one or two gain stages.
Users wanting to link inputs, but control all levels from the front-panel channel 1 knob should set System > Mode to Custom and then in Custom Setup, set Gain to Basic and Channel to Advanced.
Users wanting to link inputs with two gain stages while in Custom mode, ensure that Gain and Channel are both set to Advanced. Then, you can adjust gain levels for linked channels from the Channel 1 screen and adjust fader levels for linked channels with the Channel 1 knob.
Fixed
Corrected offset in timecode file stamps when using external LTC via the 3.5 mm Aux Input.
Limiter Indicator would not properly show activity after unlinking input channels.
Input delay for linked channels 1-2 incorrectly applied to linked channels 3-4 after power cycle.
Gain not correctly applied to MS-linked line level inputs.
Aux gain fader range display issues.
Playback issue where isolated tracks were not routed correctly to outputs.