MixPre Firmware v3.02

Last updated
Download Firmware v3.02
  • Fixed
    • Noise floor no longer increases when phantom power is turned on and off. (All models)
    • L/R Gain no longer changes when a USB controller is connected. (MixPre-10T, -10M)
    • Stereo Out Gain no longer changes when a USB controller is connected. (MixPre-3, -3M, -6, -6M)
    • MixPre no longer crashes when maximum note character limit (200 characters) is reached. (-3, -6, -10T)
    • Shortcuts menu remains visible after setting nanoKONTROL2 to anything other than gain pots. (-3, -6, -10T)
    • nanoKONTROL2 knobs can now be configured in the menu. (MixPre-3, -3M)
    • Live audio for channels 5 and 6 returns after stopping playback with USB controller connected. (MixPre-6, -6M)
    • Ambisonics: binaural recordings now have proper spatial image. (MixPre-6, -10T)
    • Ambisonics: binaural monitoring with FuMa is now spatially correct. (MixPre-6, -10T)
    • Noise floor no longer increases when phantom power is turned on and off.
    • MixPre no longer crashes when maximum note character limit (200 characters) is reached.
    • Shortcuts menu remains visible after setting nanoKONTROL2 to anything other than gain pots.
    • Stereo Out Gain no longer changes when a USB controller is connected.
    • nanoKONTROL2 knobs can now be configured in the menu.
  • Known issues
    • A rare known issue can occur resulting in recording of zero-length files or media slow errors. Sound Devices is aware of this problem and is rapidly developing a solution. Until informed otherwise, to prevent this from occurring please disable pre-roll. Additionally, if you have adjusted system time and/or date during your recording session, please cycle power after such adjustments. Please stay tuned for a firmware update to correct this issue by visiting our website or by registering your device so that you will receive an email regarding critical updates for the MixPre-Series. Thank you for your patience and understanding!