Tag: MixPre-10T

MixPre Firmware v1.53

Last updated
MixPres_1.53Download
  • Changed
    • The MixPre-10T transport control’s orange LED brightness is dimmed in stop mode to make it clearer when the unit is recording.
    • The Take List indicates which file is playing back by displaying it in green text.
  • Fixed
    • Limiters are not always enabled when switching from Advanced to Basic Mode
    • Pans were not always correct after switching to Basic Mode from Advanced Mode with Inputs Linked.
    • If timecode backup time expired when the MixPre-10T was powered off, TOD timecode was incorrect when next powered on.
    • Rare stuttering of audio during playback of some files
    • Audio crackling noise in headphones when turning HP encoder
    • Incorrect gain values when channels are MS linked
    • Sound Reports were not automatically copied to the USB thumbdrive (MixPre-10T only)
    • New Project Name was not retained after a power cycle if no files were recorded in that project
    • Long file names were not being displaying fully

Products Mentioned

MixPre-10T

Learn More

MixPre Firmware v1.51

Last updated
  • Changes
    • Date/Time settings moved to System Menu plus simplified method of entry.
    • New Project folders are now only created when the first file is recorded, preventing the SD card filling up with empty folders.
    • USB keyboard shortcut [Shift + 8] performs the * Button function. (MixPre-6 only). On the MixPre-10T, the Shift + 8 shortcut performs the * (left toggle) Switch function, and Ctrl + Shift + 8 performs the ** (right toggle) Switch function.
  • Fixed
    • Activating Record is now prevented while in USB File Transfer Mode. (MixPre-10T only)
    • Improved battery type detection.
    • MixPre-3 Input Delay values now hold over power cycles.
    • Files can now be selected for playback from the File List while the MixPre is still playing back a file.
    • Cleaned up typos and incorrect messages in various popup dialog boxes.
    • Corrected three sample offset between isolated and mix track recorded files.
    • Virtual keyboard screens were not saving and exiting on the first press of the enter key.
    • Channel knob and gain range values could be wrong after changing a channel source to Aux In or switching Aux In Mode between Mic and Line.
    • Time is now updated on the Status Bar if left as the active display.
    • Rare system lock up that could occur after hours of using Camera timecode.
    • External UBits are now stamping correctly as hex values.
    • With Channel 1 set to USB1, lInking 1-4 would assign channels 1-4 as USB1, USB1, USB2, USB3 instead of USB1, USB2, USB3, USB4.
    • Multiple other system enhancements and improvements.

MixPre Firmware v1.50

Last updated
  • New
    • This is the initial firmware release for the MixPre-10T, the newest member of the MixPre Series of recorders, mixers, and USB audio interfaces. This lightweight, 10-input/12-track recorder offers world-class sound quality, flexible powering, and built-in, highly accurate timecode generator/reader – perfect for production sound mixers, field recordists and sound designers.

MixPre Firmware v1.20

Last updated
MixPres_1.20Download
  • New
    • The MixPre-6 now offers 4-channel linking. (This feature is only available on the MixPre-6.) When channels 1-4 are linked, gain, fader, limiters, track arming, low cut filters, and input delay are all linked and controlled from Channel 1 screen and knob.
      • Note: Available options vary based on set mode.
    • Input Delay, a feature already available on the MixPre-6, is now supported on the MixPre-3. Available on channels 1-3, adjustable from 0 to 30 ms in 1 ms increments.
  • Changed
    • Yhe Linking feature was moved from Custom Setup > Gain > Advanced to Custom Setup > Channel > Advanced. This change now lets you link inputs while still having the option of one or two gain stages.
    • Users wanting to link inputs, but control all levels from the front-panel channel 1 knob should set System > Mode to Custom and then in Custom Setup, set Gain to Basic and Channel to Advanced.
    • Users wanting to link inputs with two gain stages while in Custom mode, ensure that Gain and Channel are both set to Advanced. Then, you can adjust gain levels for linked channels from the Channel 1 screen and adjust fader levels for linked channels with the Channel 1 knob.
  • Fixed
    • Corrected offset in timecode file stamps when using external LTC via the 3.5 mm Aux Input.
    • Limiter Indicator would not properly show activity after unlinking input channels.
    • Input delay for linked channels 1-2 incorrectly applied to linked channels 3-4 after power cycle.
    • Gain not correctly applied to MS-linked line level inputs.
    • Aux gain fader range display issues.
    • Playback issue where isolated tracks were not routed correctly to outputs.
>