Tag: MixPre-3M

MixPre Firmware 7.14

Last updated
Download Firmware v7.14

New

  • Added 100 Hz Low Cut Filter option.

Fixed

  • Gain ranges are now always correctly applied after loading settings. 
  • Ring LED brightness is no longer affected by channel mute status.
  • Opening a Song Project from Audio Mode no longer incorrectly opens the last Song Project instead of the selected Song Project. 

MixPre Firmware 7.13

Last updated
Download Firmware v7.13

Fixed

  • MixPre no longer enters a state where there are level discrepancies between channels. 
  • MixPre-3, MixPre-3M, MixPre-3 II, MixPre-6, MixPre-6M, and MixPre-6 II now provide a higher current on USB-A when the unit is powered via USB-C. USB-A provides up to 500 mA. Use a powered hub if your peripherals require more than 500 mA.

MixPre Firmware 7.12

Last updated
Download Firmware v7.12

Fixed

  • MixPre-10T and -10 II no longer change trim levels after a power cycle when the extra channels and Aux inputs are in use.
  • MixPre-10T and -10 II Aux input signal is no longer incorrectly routed to an output when assigned an isolated post-fade channel.
  • MixPre-10T and -10 II timecode no longer resets to BNC In after using the slate mic when timecode is set to Aux In. 
  • Channel audio no longer disappears following a render with MixPre-M models or the Musician Plugin.

MixPre Firmware 7.11

Last updated
Download Firmware v7.11

Change

  • Default isolated track names in Audio projects are now “Ch1”, “Ch2”, “Ch3”, etc.

Fixed

  • MixPre no longer becomes unresponsive following Low Cut Filter changes when a channel is off. 
  • Pressing a channel knob no longer incorrectly accesses the Channel screen while in a Music project and connected to a fader control surface with the channel knobs locked.
  • MixPre M models no longer have to be power cycled before recording or playing back if factory defaults are loaded while connected as a computer audio interface. 
  • MixAssist now functions properly following a power cycle on MixPre II models.

MixPre Firmware 7.10

Last updated
Download Firmware v7.10

New

  • Introducing front panel locks. Press channel knobs 1, 2, and 3 to enter the new Front Panel menu. Lock transport controls, touchscreen, channel knobs, and/or the headphone knob to avoid accidental changes or when you are leaving your MixPre unattended. 
  • Additional USB keyboard shortcuts:
    • Ctrl + M = Add cue marker
    • Ctrl + F = File transfer mode
    • 9, 0 = Channel screens 9 and 10 on MixPre-10T and MixPre-10 II
    • Ctrl + 1-0 =  Toggle arm status of channels 1-10
    • Option + 1-0 = Solo channels 1-10
    • Ctrl + Option +  1-0: Mute channels 1-10
    • 1 + 2 + 3 = Enters Front Panel menu

Change

  • Holding down a key on a USB keyboard for >0.5s now repeats the command. This improves usability of keyboards for setting gain and other functions.

Fixed

  • Elapsed time display is no longer missing from the home screen status bar of the MixPre-3, MixPre-3 II, MixPre-6, and MixPre-6 II.

MixPre v7.00

Last updated
Download Firmware v7.00

When updating from v6.00 or below to v7.00 or above, the firmware update process must be run twice. See installation instructions included within this firmware download for more information.

New

  • Introducing NoiseAssist, an optional paid plugin for one instance of adaptive ambient noise suppression. NoiseAssist is an advanced signal processing algorithm that reduces background noises such as traffic, generators, HVAC noise, and more. It features a simple user interface with only one adjustment, the amount of background noise to suppress. The plugin is available now at store.sounddevices.com for an introductory price of $300. Available in Advanced mode or Custom modes with Record or Channel set to Advanced. (MixPre II Series Only)
  • MixPre-3 II and MixPre-6 II now have output delay available.
    When sending audio to video operators on a production set, output delay ensures that audio is in sync with camera video feeds. Outputs can be delayed from 0 to 400 ms.
  • Output delay now applies to USB Outputs.
    Prior to firmware v7.00, output delay only applied to analog outputs. Delay may be used to keep audio from USB outputs in sync with video streams, which inherently have more latency than audio.
    (Only applies to MixPre-3 II, MixPre-6 II, MixPre-10 II, and MixPre-10T)
  • Support for P.I. Engineering’s X-keys® Programmable Keypads, Sticks & Keyboards.
    X-keys products are programmable via P.I Engineering software to any standard USB keyboard functions. When mapped to the same keyboard functions as the MixPre’s USB Keyboard Shortcuts, these compact control surfaces can offer quick, tactile control of MixPre functions. Functions include Record, Stop, Play, and many more. 
  • USB 1 and 2 can now be used as sources for headphone presets in Audio mode. 
  • MixAssist is now available with all sampling rates at or below 48.048 kHz.

Fixed

  • MixPre no longer goes unresponsive when a keyboard command is sent while in the File List. 
  • Aux 1 and 2 routed to channels 5, 6 on MixPre-6 and -6 II or to channels 9, 10 on MixPre-10 T and -10 II no longer change levels when Playback is stopped.  
  • Audio level discrepancies between channel gain in basic mode and the USB Outputs no longer occur. 
  • Channels 5, 6 on MixPre-6 and -6 II or channels 9, 10 on MixPre-10T and -10 II are no longer panned incorrectly following a power cycle when Outputs are set to basic. 
  • Headphone Presets with linked pairs no longer only play one side of the linked pair. 
  • USB Output routing no longer allows both pre- and post-fade routing while in Custom modes with gain set to Basic and channel and outputs set to Advanced. 
  • Output and Headphone Limiters no longer remain active when switching to 32 Bit Float from 16- or 24-Bit with the limiters on.
>