Firmware

702T Firmware v2.61

New Periodic, automatic file header saving during recording to preserve WAV file integrity in the event power is lost during recording. Does not apply to FLAC or MP3 recording. Menu option to allow display of gain settings instead of sample rate/gain in the LCD. Latching tone – press and hold tone button >2 secs to […]

Read The Full Article

788T Firmware v1.65

New Sampling rates of 88.2 kHz and 96 kHz, for up to 8-track recording to 2 media simultaneously. Latching tone option. A quick press of tone button latches the tone oscillator on, long press is momentary action. “Tape” metadata defaults to date if Tape (mid-level) folder is set to NONE. Important for AVID/TITAN/PROTOOLS EDL based […]

Read The Full Article

702T Firmware v2.54

New Added beeps to Rec-Pause Mode, so beeps occur when recording is paused and un-paused. Fixed SPEED and TAKE tags were sometimes not written the BEXT chunk when the recorder was in EXT_TC AUTO or EXT_TC/CONT AUTO. This bug did not affect the iXML tags – they are always correct The REC: Timer Start/Stop function […]

Read The Full Article

788T Firmware v1.60

New Added CL8 controller functionality 12-track recording (limited to 8-tracks when recording to 3 simultaneous record media) Dedicated track arming controls accessed using the Input button. Tracks can be record-enabled or disabled independently of input-to-track routing. This allows multiple inputs to be routed to tracks without needing to record them plus the ability to change […]

Read The Full Article

788T Firmware v1.51

New All metadata is now applied across all drives, and all files for a given take All editing of metadata, renaming of files, deleting of files done via “EDIT” button on take list. SRCs are now enabled when necessary automatically based on sync source and incoming inputs AES42 microphones now supported (note: 788T limiter not […]

Read The Full Article

788T Firmware v1.11

Fixed Eliminates a hardware instability which could result in occasional erratic operation such as artifacts on the LCD screen or non-functional knobs.

Read The Full Article