Articles

A-FLIP Installation

The A-FLIP is a SuperSlot adapter that changes the orientation of an A10-RX in an SL-6 or A10-RACK The instructions below describe installation of the A-FLIP adapter Before starting please make note of the following: Supplies Required A Phillips head screwdriver The A-FLIP uses the screws already installed in the A-SL Four M2.5×0.45 16mm screws […]

Read The Full Article

Servicing Audio Ltd Analog Products

All Audio Ltd analogue products are serviced through the factory authorised service centres listed below: Audio Related Technology LtdPrimary UK Authorised Service Centre 5 Phoenix Business CentreCheshamHP5 2AJTel: 01494 794 286 URL: www.audiorelated.comEmail: [email protected] Everything Audio LtdUK Authorised Service Centre Elstree Film StudiosShenley RoadBorehamwoodHertsWD6 1JGTel: 020 8324 2726 URL: www.everythingaudio.co.ukEmail: [email protected] VDB AudioAuthorised Service Centre – France 4 Rue […]

Read The Full Article

A-FILTER Installation

The A-FILTER for Balanced Microphones adds RF immunity for microphones, specifically when connected to digital wireless transmitters like the A10-TX. The instructions below describe how to mount the A-FILTER for Balanced Microphones into a female XLR connector. Before starting please make note of the following: The A-FILTER should be placed as close to the microphone as […]

Read The Full Article

Eliminating RF-Induced Microphone Noise

Using older, balanced microphones with the A10 Digital Wireless System can lead to unwanted noise. Although the inputs on the A10 System are fully protected from radio frequency interference, older microphones themselves are sensitive to RF. Here are a few solutions to remove the unwanted noise being picked up by your older microphone: Sending your […]

Read The Full Article

The A10-TX Advantage in Wireless Booming

Sound Devices’ Tech Support Specialist, Danny Greenwald, who worked as a boom operator on some of Hollywood’s most popular TV series over his 20 year career, dives into the Audio Ltd A10 Digital Wireless Transmitter and discusses its advantages as a wireless boom recording solution on set.

Read The Full Article

A10 System FAQ

Is a digital wireless system better than an analog system? Read this article for more information! If I purchase the slot version of the receiver (A10-RX-SL) can I change it to the connector version (A10-RX-XLR), and vice-versa? Yes, each model of the receiver can be converted to the other. With an A-XLR, the slot version […]

Read The Full Article