Search Articles
Product Series Filter
Articles
Minimizing RF Problems When Using Digital Wireless Audio
Minimizing RF interference is essential to achieve the best wireless audio possible. Several common issues which result in dropouts and short range include: Interference from other RF sources (RFI). This includes DTV broadcast television, gigantic video walls, and RF video links. RF video systems can be the source of interference, even though most of these […]
Read The Full Article
Appropriate Antennas Defined
Selecting the appropriate antenna for wireless operation is very important when it comes to planning any wireless system. Confirm the antennas in use support the operational frequency range being used by the transmitter and receiver. As we will discuss later, some antennas offer different characteristics such as gain or directivity and can be used to […]
Read The Full Article Why Digital Wireless?
Wireless systems are designed to replace signal cables. While cables are simple and reliable, many times going ‘hardline’ is impractical or impossible. A wireless system, such as the A10 Digital Wireless System, that sounds and performs as much like a cable as possible is the next best thing. Wireless systems can be digital or analog. […]
Read The Full Article
SL-2 FAQ
What is SuperSlot? SuperSlot™ is an open, electro-mechanical connection specification, developed by Sound Devices, to simplify the interconnection of wireless audio transmitters and receivers with audio mixers and cameras for the entire industry to use. SuperSlot provides power, audio, and control signals over a single multi-pin connection. SuperSlot-compatible products are offered by multiple manufacturers. Read […]
Read The Full Article
A-FILTER-R Installation
The A-FILTER-R for Balanced Microphones improves RF immunity for microphones, specifically when connected to digital wireless transmitters like the A10-TX. The instructions below describe how to mount the A-FILTER-R for Balanced Microphones into a female right angle XLR connector. Before starting assembly, please make note of the following: The A-FILTER-R should be placed as close to […]
Read The Full Article
SL-Riser Assembly
Remove all batteries and disconnect DC inputs from both the SL-6 and Scorpio prior to connecting the SL-6 to the Scorpio. Failure to remove power could result in damage to the hardware. The SL-Riser is a mechanical mount required for attaching the SL-6 to the Scorpio. The following instructions are for installing the SL-Riser and […]
Read The Full Article