Search Articles

Product Series Filter

Articles

A-FLIP Installation

The A-FLIP is a SuperSlot adapter that changes the orientation of an A10-RX in an SL-6 or A10-RACK The instructions below describe installation of the A-FLIP adapter Before starting please make note of the following: Supplies Required A Phillips head screwdriver The A-FLIP uses the screws already installed in the A-SL Four M2.5×0.45 16mm screws […]

Read The Full Article

A-FILTER Installation

The A-FILTER for Balanced Microphones adds RF immunity for microphones, specifically when connected to digital wireless transmitters like the A10-TX. The instructions below describe how to mount the A-FILTER for Balanced Microphones into a female XLR connector. Before starting please make note of the following: The A-FILTER should be placed as close to the microphone as […]

Read The Full Article

Eliminating RF-Induced Microphone Noise

Using older, balanced microphones with the A10 Digital Wireless System can lead to unwanted noise. Although the inputs on the A10 System are fully protected from radio frequency interference, older microphones themselves are sensitive to RF. Here are a few solutions to remove the unwanted noise being picked up by your older microphone: Sending your […]

Read The Full Article

The A10-TX Advantage in Wireless Booming

Sound Devices’ Tech Support Specialist, Danny Greenwald, who worked as a boom operator on some of Hollywood’s most popular TV series over his 20 year career, dives into the Audio Ltd A10 Digital Wireless Transmitter and discusses its advantages as a wireless boom recording solution on set.

Read The Full Article

A10 System FAQ

Is a digital wireless system better than an analog system? Read this article for more information! If I purchase the slot version of the receiver (A10-RX-SL) can I change it to the connector version (A10-RX-XLR), and vice-versa? Yes, each model of the receiver can be converted to the other. With an A-XLR, the slot version […]

Read The Full Article

Multipath Interference and Diversity Switching

A significant challenge for engineers designing a wireless microphone system is addressing multipath interference. The Audio Ltd A10 digital wireless microphone system devotes significant signal processing resources to achieving robust performance in the presence of both short range and long range multipath. This note briefly explains what multipath is, why it is a problem, and […]

Read The Full Article