Tag: 833

ID.TF2

Last updated

Made By: Simon Jorgensen.

This product is very simple and easy to understand. Extend your Sound Devices 8-series recorder with two extra trim and volume knobs, e.g. ch 7 and 8 for the 833. Plug and power via USB, control channel trim and channel volume, no further setup required. Knobs are very quiet endless encoders. Small design changes may occur from batch to batch (only for improvements)

Features

  • Toggle between trim and fader with the button
  • Access PFL by pressing the encoders.
  • Long press each encoder button for mappable functions (via SD controller menu)
Learn More

ID.TF2X

Last updated

Made By: IDDQD.

The unit has two smooth endless rotary encoder knobs with push buttons, that can control multiple channels by switching the channel set. It weighs only 60 grams, measuring 62x27x60 mm (including knob height) mm. The unit needs 12-15 seconds to boot. I try to make products that don’t require a user manual, but anyway:

  • Plug in via USB A
  • Black button toggle trim or volume. Trim = LED flash, Volume = LED solid
  • Double press each encoder to cycle back and forth through channel sets
  • Single press each encoder to activate PFL for corresponding channel

The enclosure is made from PLA. USB plugs in from the right underside

Learn More

ID.TF6

Last updated

Made By: Simon Jorgensen.

A 6 channel version of my simple trim/volume controller. Smooth stepless encoders. 3D printed and assembled by hand in my basement. Please read the full description and FAQ below before you purchase. Small design changes may occur from batch to batch, improvements only.

Sound Devices 833 (+4): ch 7-12

Sound Devices 888: ch 9-14

Sound Devices Scorpio: ch 13-18

Learn More

GL-R6

Last updated

Made By: SoundReal.

GLR6 will be released in aluminium casing and will include full 5 different settings modes to work with Sound Devices 833, 833+4, 888, Scorpio and more.

Features include

  • Control for every channel of your SD 8-series mixer.
  • Mode and channel settings are saved every time you interact with GLR6, so whenever you reboot your mixer you can start where you left off. 
  • Full integration with the Sound Devices 8-series mixers and a fantastic feel for seamless transitions between your mixer of choice and the GLR6.
Learn More

8-Series v9.31 Firmware

Last updated
Download Firmware v9.31

Note: To ensure best performance, always run the latest version of 8-Series firmware with the latest version of SD-Remote.

Fixed 

  • Audible clicks and noise with some superslot receiver /slot combinations in an SL-2 no longer occur. 

8-Series v9.30 Firmware

Last updated
Download Firmware v9.30

Note: To ensure best performance, always run the latest version of 8-Series firmware with the latest version of SD-Remote.

New
  • Lectrosonics DSR4 full SuperSlot control via SL-2. Ensure the DSR4 is running v1.09 firmware or higher.
  • Added Mute/Arm Grouping allowing mutes and arms to be independently grouped from trim and fader control. Select in the Channel setup>Channel Grouping menu. 
  • New System>Headphone Volume Lock menu allowing users to lock/unlock the headphone volume control. 
Changes 
  • Default CL-16 U4 button changed to AutoMixer 
Fixed 
  • To prevent a lockup, the Controllers > Mapping menu now ignores the ‘Fav’/Reset toggle when bringing up the popup list to change the mapped button’s action. 
  • Full SD Cards no longer show as “>99h” remaining in the File List. 
  • The CL-16 Scene Increment Button no longer stays incorrectly illuminated. 
  • The CL-16 Bus Sends on Faders mode middle row encoders now adjust send level for channels 17-32. 
  • All CL-16 Bus Mute Indicators now persist when exiting then re-entering Bus Mode. 
  • BWF files are no longer intermittently being recorded as RF64 files. 
>