For optimum performance, the following settings are recommended if using Lectrosonics SRB or Wisycom MCR-42S unislot receivers with the SL-6, when they have not been upgraded to SuperSlot.
| RECEIVER | SETTING |
| Lectrosonics | SETUP > LEVEL = -6 |
| SETUP > PHASE = + | |
| Wisycom MCR-42S | MENU > Advanced > LINE Mode = Analog |
| MENU > Advanced > Edit RX1/RX2 > Audio Out > LINE max lev = 0 dBU | |
| MENU > Advanced > Edit RX1/RX2 > Sig. phase = 0° |
When using SuperSlot receivers with the SL-6, some receiver settings are automatically set by the mixer for optimized performance.
Continue reading “Output Setup for SuperSlot Receivers”Paul Isaacs, Director of Product Management and Design, talks about SL-6 with SuperSlot and how it can be used with Sound Devices’ 688 to simplify interconnection for Production Sound Mixers.
During the final testing stage of the SL-6, we identified that when paired with some existing 688 Mixer/Recorders, low levels of RF can be emitted from the 688. This may result in reduced range of wireless microphone systems and/or available clear frequencies.
The identified 688s can still be used as is with the SL-6; however, users may notice low-level RF on certain frequencies during scans. As with any occupied frequency, these frequencies can be avoided. Therefore, to provide you with the utmost performance in the field, we are offering a modification for affected units.
Note: If you are not using the SL-6, then no action is necessary; the respective 688s only exhibit this behavior when connected to an SL-6. If you do not plan to use the SL-6 Powering and Wireless System, you can continue to use your 688 as clearly and reliably as always.
NEXT STEPS: UPDATING YOUR 688 If your unit has a serial number in the range of NR0115022000 to NR0215134010, or was shipped from Sound Devices between March 1, 2015 thru June 23, 2015, and you are looking to add the SL-6 to your kit, we recommend sending your unit in for quick turnaround modification.
To arrange for an update please contact your local Distributor or Reseller. You are also welcome to contact us directly:
302, 442, 442N, 552, 633, 664, 688, 702, 702T, 722, 744T, 788T, 788T-SSD, 833, 888, A10-RACK, A10-RX, A10-TX, A10-TX-US, A20-Mini, A20-Nexus, A20-Nexus Go, A20-Opto, A20-Outpost-NL, A20-RX, A20-SuperNexus, A20-TX, CL-12, HX-3, MD-4, MixPre, MixPre-10 II, MixPre-10M, MixPre-10T, MixPre-3, MixPre-3 II, MixPre-3M, MixPre-6, MixPre-6 II, MixPre-6M, MixPre-D, MM-1, MP-1, MP-2, Scorpio, USBPre, USBPre 2
Sound Devices, LLC warrants the items listed above against defects in materials and workmanship for a period of ONE (1) year from date of original retail purchase. Users who register their product directly with Sound Devices Technical Support using the online form or by phone, will receive an additional ONE (1) year of warranty coverage, extending the complete warranty period to TWO (2) years from the date of original retail purchase. In order to extend the warranty coverage period, registration must be completed within the initial ONE (1) year warranty period. Products must be purchased through authorized Sound Devices resellers to qualify for Warranty coverage. Damage resulting from the opening of a Sound Devices product or attempted repairs by a non-authorized Sound Devices repair technician will void warranty coverage.
This is a non-transferable warranty that extends only to the original purchaser. Sound Devices, LLC will repair or replace the product at its discretion at no charge. Warranty claims due to severe service conditions will be addressed on an individual basis.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE. SOUND DEVICES, LLC DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOUND DEVICES, LLC IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY. Because some jurisdictions do not permit the exclusion or limitations set forth above, they may not apply in all cases.
For all service, including warranty repair, please contact Sound Devices for an RMA (return merchandise authorization) before sending your unit in for repair. Product returned without an RMA number may experience delays in repair. When sending a unit for repair, please do not include accessories, including SSD drives, CF cards, batteries, power supplies, carry cases, cables, or adapters unless instructed by Sound Devices. Sound Devices repairs and replacements may be completed using refurbished, returned or used parts that have been factory certified as functionally equivalent to new parts.
Sound Devices, LLC
Services Repair RMA #XXXXX
E7556 State Road 23 and 33
Reedsburg, WI 53959 USA
Telephone: +1-608-524-0625