Search Articles
Product Series Filter
Articles
Proper Routing When Recording Inputs 3 and 4 Only on the 744T
Q: I am set up to record two-track WAV poly files with my 744T but when I import my files into my DAW there are four tracks, two of which have nothing on them. I feed the recorder a two-channel stereo mix using the line in TA3 connectors on my 744T. I have custom routed […]
Read The Full ArticleWAV Mono vs. WAV Poly
Q: The 7-Series recorders have two options for WAV files, WAV mono and WAV poly. What’s the difference between these two WAV file types?
Read The Full ArticleFirmware Updates for Pre-2.0 Hardware
Q: I have an early 744T, 722, 702T, or 702 recorder which has not yet been factory-updated with “2.0-ready” updates. Can I run firmware revisions later than 1.74 on it?
Read The Full ArticleEditing Metadata on Multiple 7-Series Recorders
Q: I have a couple questions about the CL-1: Can I use ONE keyboard to enter metadata on multiple 7-Series even if it needs to be entered physically twice? Can the CL-1 be used to control transport of both machines? I am assuming this is possible…
Read The Full ArticleDVD-RAM Media Used in the XL-DVDRAM
Q: I’m running an XL-DVDRAM with my 702T, and am using it to copy/back-up the files I record on the 702T. I noticed that you recommend 5X DVD-RAMs for this, but that 3X would work.
Read The Full ArticleMS Stereo with 442 & 302 Mixers
Both the 442 and 302 field mixers can decode MS stereo microphone signals. Depending on your workflow you can decide to decode the MS stereo signal in one of two ways:
Read The Full Article